Biotransformation of ethylene glycol by engineered Escherichia coli.

There has been extensive research on the biological recycling of PET waste to address the issue of plastic waste pollution, with ethylene glycol (EG) being one of the main components recovered from this process. Therefore, finding ways to convert PET monomer EG into high-value products is crucial for effective PET waste recycling. In this study, we successfully engineered Escherichia coli to utilize EG and produce glycolic acid (GA), expecting to facilitate the biological recycling of PET waste. The engineered E. coli, able to utilize 10 g/L EG to produce 1.38 g/L GA within 96 h, was initially constructed. Subsequently, strategies based on overexpression of key enzymes and knock-out of the competing pathways are employed to enhance EG utilization along with GA biosynthesis. An engineered E. coli, characterized by the highest GA production titer and substrate conversion rate, was obtained. The GA titer increased to 5.1 g/L with a yield of 0.75 g/g EG, which is the highest level in the shake flake experiments. Transcriptional level analysis and metabolomic analysis were then conducted, revealing that overexpression of key enzymes and knock-out of the competing pathways improved the metabolic flow in the EG utilization. The improved metabolic flow also leads to accelerated synthesis and metabolism of amino acids.

Proteomic analysis reveals that the co-ordination of cytosolic and mitochondrial pathways is beneficial for sabinene biosynthesis in engineered Saccharomyces cerevisiae.

Reconstruction and optimization of biosynthetic pathways can help to overproduce target chemicals in microbial cell factories based on genetic engineering. However, the perturbation of biosynthetic pathways on cellular metabolism is not well investigated and profiling the engineered microbes remains challenging. The rapid development of omics tools has the potential to characterize the engineered microbial cell factory. Here, we performed label-free quantitative proteomic analysis and metabolomic analysis of engineered sabinene overproducing Saccharomyces cerevisiae strains. Combined metabolic analysis andproteomic analysis of targeted mevalonate (MVA) pathway showed that co-ordination of cytosolic and mitochondrial pathways had balanced metabolism, and genome integration of biosynthetic genes had higher sabinene production with less MVA enzymes. Furthermore, comparative proteomic analysis showed that compartmentalized mitochondria pathway had perturbation on central cellular metabolism. This study provided an omics analysis example for characterizing engineered cell factory, which can guide future regulation of the cellular metabolism and maintaining optimal protein expression levels for the synthesis of target products.

Systems Metabolic Engineering for Efficient Violaxanthin Production in Yeast.

Violaxanthin is a plant-derived orange xanthophyll with remarkable antioxidant activity that has wide applications in various industries, such as food, agriculture, and cosmetics. In addition, it is the key precursor of important substances such as abscisic acid and fucoxanthin. Saccharomyces cerevisiae, as a GRAS (generally regarded as safe) chassis, provides a good platform for producing violaxanthin production with a yield of 7.3 mg/g DCW, which is far away from commercialization. Herein, an integrated strategy involving zeaxanthin epoxidase (ZEP) source screening, cytosol redox state engineering, and nicotinamide adenine dinucleotide phosphate (NADPH) regeneration was implemented to enhance violaxanthin production in S. cerevisiae. 58aa-truncated ZEP from Vitis vinifera exhibited optimal efficiency in an efficient zeaxanthin-producing strain. The titer of violaxanthin gradually increased by 17.9-fold (up to 119.2 mg/L, 15.19 mg/g DCW) via cytosol redox state engineering and NADPH supplementation. Furthermore, balancing redox homeostasis considerably improved the zeaxanthin concentration by 139.3% (up to 143.9 mg/L, 22.06 mg/g DCW). Thus, the highest reported titers of violaxanthin and zeaxanthin in S. cerevisiae were eventually achieved. This study not only builds an efficient platform for violaxanthin biosynthesis but also serves as a useful reference for the microbial production of xanthophylls.

Enzyme Engineering Renders Chlorinase the Activity of Fluorinase.

Organofluorine compounds have attracted substantial attention owing to their wide application in agrochemistry. Fluorinase (FlA) is a unique enzyme in nature that can incorporate fluorine into an organic molecule. Chlorinase (SalL) has a similar mechanism as fluorinase and can use chloride but not fluoride as a substrate to generate 5'-chloro-deoxyadenosine (5'-ClDA) from S-adenosyl-l-methionine (SAM). Therefore, identifying the features that lead to this selectivity for halide ions is highly important. Here, we engineered SalL to gain the function of FlA. We found that residue Tyr70 plays a key role in this conversion through alanine scanning. Site-saturation mutagenesis experiments demonstrated that Y70A/C/S/T/G all exhibited obvious fluorinase activity. The G131S mutant of SalL, in which the previously thought crucial residue Ser158 for fluoride binding in FlA was introduced, did not exhibit fluorination activity. Compared with the Y70T single mutant, the double mutant Y70T/W129F increased 5'-fluoro-5-deoxyadenosine (5'-FDA) production by 76%. The quantum mechanics (QM)/molecular mechanics (MM) calculations suggested that the lower energy barriers and shorter nucleophilic distance from F- to SAM in the mutants than in the SalL wild-type may contribute to the activity. Therefore, our study not only renders SalL the activity of FlA but also sheds light on the enzyme selectivity between fluoride versus chloride.

[Advances in abscisic acid biosynthesis].

Abscisic acid, a plant hormone that inhibits growth, is a key factor in balancing plant endogenous hormones and regulating growth and metabolism. Abscisic acid can improve the drought resistance and salt tolerance of crops, reduce fruit browning, reduce the incidence rate of malaria and stimulate insulin secretion, so it has a broad application potential in agriculture and medicine. Compared with traditional plant extraction and chemical synthesis, abscisic acid synthesis by microorganisms is an economic and sustainable route. At present, a lot of progress has been made in the synthesis of abscisic acid by natural microorganisms such as Botrytis cinerea and Cercospora rosea, while the research on the synthesis of abscisic acid by engineered microorganisms is rarely reported. Saccharomyces cerevisiae, Yarrowia lipolytica and Escherichia coli are common hosts for heterologous synthesis of natural products due to their advantages of clear genetic background, easy operation and friendliness for industrial production. Therefore, the heterologous synthesis of abscisic acid by microorganisms is a more promising production method. The author reviews the research on the heterologous synthesis of abscisic acid by microorganisms from five aspects: selection of chassis cells, screening and expression enhancement of key enzymes, regulation of cofactors, enhancement of precursor supply and promotion of abscisic acid efflux. Finally, the future development direction of this field is prospected.

Systematic Mining and Evaluation of the Sesquiterpene Skeletons as High Energy Aviation Fuel Molecules.

Sesquiterpenes have been identified as promising ingredients for aviation fuels due to their high energy density and combustion heat properties. Despite the characterization of numerous sesquiterpene structures, studies testing their performance properties and feasibility as fuels are scarce. In this study, 122 sesquiterpenoid skeleton compounds, obtained from existing literature reports, are tested using group contribution and gaussian quantum chemistry methods to assess their potential as high-energy aviation fuels. Seventeen sesquiterpene compounds exhibit good predictive performance and nine compounds are further selected for overproduction in yeast. Through fed-batch fermentation, all compounds achieve the highest reported titers to date. Subsequently, three representative products, pentalenene, presilphiperfol-1-ene, and α-farnesene, are selected, produced, purified in large quantities, and tested for use as potential fuels. The performance of pentalenene, presilphiperfol-1-ene, and their derivatives reveals favorable prospects as high-energy aviation fuels.

Modular Pathway Compartmentalization for Agroclavine Overproduction in Saccharomyces cerevisiae.

Agroclavine, which has anti-depressant activity and anti-Alzheimer effects, is the raw material used to synthesize ergo-based drugs. Although the production of agroclavine from Saccharomyces cerevisiae is possible, its yield is exceptionally low. The current study proposes a modular compartmentalization strategy for identifying and modifying the bottleneck step in agroclavine overproduction. The agroclavine synthetic pathway was reconstituted in yeast, and the best combination of Claviceps fusiformis EasA with Claviceps purpurea EasD/EasG was identified. According to the data on the expression and subcellular localization of agroclavine pathway proteins, the whole pathway was divided into two modules by chanoclavine-I. Separate enzyme distribution within the downstream module and low expression of DmaW and EasE in the upstream module were identified as the bottleneck steps in the pathway. The pathway efficiency was enhanced 2.06-fold when the downstream module was entirely anchored to the endoplasmic reticulum compartment. Increasing NADPH supply by overexpressing POS5 further improved the agroclavine yield by 27.4%. Altering the intracellular localization of DmaW from the peroxisome to the endoplasmic reticulum (ER) not only improved protein expression but also accelerated the accumulation of agroclavine by 59.9%. Integration of all modified modules into the host chromosome resulted in an improved yield of agroclavine at 101.6 mg/L with flask fermentation (a 241-fold improvement over the initial strain) and ultimately produced 152.8 mg/L of agroclavine on fed-batch fermentation. The current study unlocked the potential of S. cerevisiae in the advanced biosynthesis of ergot alkaloids. It also provides a promising strategy to reconstitute compartmentalized pathways.

Compartmentalization engineering of yeasts to overcome precursor limitations and cytotoxicity in terpenoid production.

Metabolic engineering strategies for terpenoid production have mainly focused on bottlenecks in the supply of precursor molecules and cytotoxicity to terpenoids. In recent years, the strategies involving compartmentalization in eukaryotic cells has rapidly developed and have provided several advantages in the supply of precursors, cofactors and a suitable physiochemical environment for product storage. In this review, we provide a comprehensive analysis of organelle compartmentalization for terpenoid production, which can guide the rewiring of subcellular metabolism to make full use of precursors, reduce metabolite toxicity, as well as provide suitable storage capacity and environment. Additionally, the strategies that can enhance the efficiency of a relocated pathway by increasing the number and size of organelles, expanding the cell membrane and targeting metabolic pathways in several organelles are also discussed. Finally, the challenges and future perspectives of this approach for the terpenoid biosynthesis are also discussed.

Systematic Engineering to Enhance 8-Hydroxygeraniol Production in Yeast.

8-Hydroxygeraniol, an important component of insect sex pheromones and defensive secretions, can be used as a potential biological insect repellent in agriculture. Microbial production provides sustainable and green means to efficiently gain 8-hydroxygeraniol. The conversion of geraniol to 8-hydroxygeraniol by P450 geraniol-8-hydroxylase (G8H) was regarded as the bottleneck for 8-hydroxygeraniol production. Herein, an integrated strategy consisting of the fitness between G8H and cytochrome P450 reductase (CPR), endoplasmic reticulum (ER) engineering, and reduced nicotinamide adenine dinucleotide phosphate (NADPH) supply is implemented to enhance the production of 8-hydroxygeraniol in Saccharomyces cerevisiae. The titer of 8-hydroxygeraniol was gradually increased by 2.1-fold (up to 158.1 mg/L). Moreover, dehydrogenase ADH6 and reductase ARI1 responsible for the reduction of 8-hydroxygeraniol toward shunt products were also deleted, elevating 8-hydroxygeraniol production to 238.9 mg/L at the shake flask level. Consequently, more than 1.0 g/L 8-hydroxygeraniol in S. cerevisiae was achieved in 5.0 L fed-batch fermentation by a carbon restriction strategy, which was the highest-reported titer in microbes so far. Our work not only provides a sustainable way for de novo biosynthesis of 8-hydroxygeraniol but also sets a good reference in P450 engineering in microbes.

Modular Coculture to Reduce Substrate Competition and Off-Target Intermediates in Androstenedione Biosynthesis.

Substrate competition within a metabolic network constitutes a common challenge in microbial biosynthesis system engineering, especially if indispensable enzymes can produce multiple intermediates from a single substrate. Androstenedione (4AD) is a central intermediate in the production of a series of steroidal pharmaceuticals; however, its yield via the coexpression of 3ß-hydroxysteroid dehydrogenase (3ß-HSD) and 17α-hydroxylase/17,20-lyase (CYP17A1) in a microbial chassis affords a nonlinear pathway in which these enzymes compete for substrates and produce structurally similar unwanted intermediates, thereby reducing 4AD yields. To avoid substrate competition, we split the competing 3ß-HSD and CYP17A1 pathway components into two separate Yarrowia lipolytica strains to linearize the pathway. This spatial segregation increased substrate availability for 3ß-HSD in the upstream strain, consequently decreasing the accumulation of the unwanted intermediate 17-hydroxypregnenolone (17OHP5) from 94.8 ± 4.4% in single-chassis monocultures to 24.8 ± 12.6% in cocultures of strains expressing 3ß-HSD and CYP17A1 separately. Orthologue screening to increase CYP17A1 catalytic efficiency and the preferential production of desired intermediates increased the biotransformation capacity in the downstream pathway, further decreasing 17OHP5 accumulation to 3.9%. Furthermore, nitrogen limitation induced early 4AD accumulation (final titer, 7.71 mg/L). This study provides a framework for reducing intrapathway competition between essential enzymes during natural product biosynthesis as well as a proof-of-concept platform for linear steroid production.

Elimination of enzymes catalysis compartmentalization enhancing taxadiene production in Saccharomyces cerevisiae.

Taxadiene is an important precursor in taxol biosynthesis pathway, but its biosynthesis in eukaryotic cell factories is limited, which seriously hinders the biosynthesis of taxol. In this study, it is found that there was the catalysis compartmentalization between two key exogenous enzymes of geranylgeranyl pyrophosphate synthase and taxadiene synthase (TS) for taxadiene synthesis progress, due to their different subcellular localization. Firstly, the enzyme-catalysis compartmentalization was overcome by means of the intracellular relocation strategies of taxadiene synthase, including N-terminal truncation of taxadiene synthase and enzyme fusion of GGPPS-TS. With the help of two strategies for enzyme relocation, the taxadiene yield was increased by 21% and 54% respectively, among them the GGPPS-TS fusion enzyme is more effective. Further, the expression of GGPPS-TS fusion enzyme was improved via the multi-copy plasmid, resulting that the taxadiene titer was increased by 38% to 21.8 mg/L at shake-flask level. Finally, the maximum taxadiene titer of 184.2 mg/L was achieved by optimization of the fed-batch fermentation conditions in 3 L bioreactor, which is the highest reported titer of taxadiene biosynthesis accomplished in eukaryotic microbes. This study provides a successful example for improving biosynthesis of complex natural products by solving the critical problem of multistep enzymes catalysis compartmentalization.

Adaptive Evolution and Metabolic Engineering Boost Lycopene Production in Saccharomyces cerevisiae via Enhanced Precursors Supply and Utilization.

Lycopene is a red carotenoid with remarkable antioxidant activity, which has been widely used in food, cosmetics, medicine, and other industries. Production of lycopene in Saccharomyces cerevisiae provides an economic and sustainable means. Many efforts have been done in recent years, but the titer of lycopene seems to reach a ceiling. Enhancing the supply and utilization of farnesyl diphosphate (FPP) is generally regarded as an efficient strategy for terpenoid production. Herein, an integrated strategy by means of atmospheric and room-temperature plasma (ARTP) mutagenesis combined with H2O2-induced adaptive laboratory evolution (ALE) was proposed to improve the supply of upstream metabolic flux toward FPP. Enhancing the expression of CrtE and introducing an engineered CrtI mutant (Y160F&N576S) increased the utilization of FPP toward lycopene. Consequently, the titer of lycopene in the strain harboring the Ura3 marker was increased by 60% to 703 mg/L (89.3 mg/g DCW) at the shake-flask level. Eventually, the highest reported titer of 8.15 g/L of lycopene in S. cerevisiae was achieved in a 7 L bioreactor. The study highlights an effective strategy that the synergistic complementarity of metabolic engineering and adaptive evolution facilitates natural product synthesis.

Yeast-based evolutionary modeling of androgen receptor mutations and natural selection.

Cancer progression is associated with the evolutionary accumulation of genetic mutations that are biologically significant. Mutations of the androgen receptor (AR) are associated with the development of prostate cancer (PCa) by responding to non-androgenic hormones, and the lack of annotations in their responsiveness to hormone ligands remains a daunting challenge. Here, we have used a yeast reporter system to quickly evaluate the responsiveness of all fifty clinical AR mutations to a variety of steroidal ligands including dihydrotestosterone (DHT), 17ß-estradiol (E2), progesterone (PROG), and cyproterone acetate (CPA). Based on an AR-driven reporter that synthesizes histidine, a basic amino acid required for yeast survival and propagation, the yeast reporter system enabling clonal selection was further empowered by combining with a random DNA mutagenesis library to simulate the natural evolution of AR gene under the selective pressures of steroidal ligands. In a time-frame of 1-2 weeks, 19 AR mutants were identified, in which 11 AR mutants were validated for activation by tested steroidal compounds. The high efficiency of our artificial evolution strategy was further evidenced by a sequential selection that enabled the discovery of multipoint AR mutations and evolution directions under the pressure of steroidal ligands. In summary, our designer yeast is a portable reporter module that can be readily adapted to streamline high-throughput AR-compound screening, used as a PCa clinical reference, and combined with additional bioassay systems to further extend its potential.

Simulating androgen receptor selection in designer yeast.

Androgen receptor (AR) mutation is closely associated with prostate cancer (PCa) and is one of the mechanisms of resistance to PCa therapies such as AR antagonists. Although sequencing technologies like next-generation sequencing (NGS) contributes to the high-throughput and precise detection of AR mutations carried by PCa patients, the lack of interpretations of these clinical genetic variants has still been a roadblock for PCa-targeted precision medicine. Here, we established a designer yeast reporter assay to simulate natural androgen receptor (AR) selection using AR antagonists. Yeast HIS3 gene transactivation was associated with the ligand-induced recruitment of steroid receptor coactivator-1 (SRC-1) by AR mutants, where yeast growth in histidine-free medium was determined as the outcome. This assay is applicable to determine a wide range of clinical AR mutants including those with loss of function relating to androgen insensitivity syndrome (AIS), and those associated with PCa conferring resistance to AR antagonists such as enzalutamide (ENZ), bicalutamide (BIC), and cyproterone acetate (CPA). One clinical AR mutant previously reported to confer ENZ-resistance, F877L, was found to confer partial resistance to CPA as well using designer yeast. Our simple and efficient assay can enable precise one-pot screening of AR mutants, providing a reference for tailored medicine.

Production of Plant Sesquiterpene Lactone Parthenolide in the Yeast Cell Factory.

Parthenolide, a kind of sesquiterpene lactone, is the direct precursor for the promising anti-glioblastoma drug ACT001. Compared with traditional parthenolide source from plant extraction, de novo biosynthesis of parthenolide in microorganisms has the potential to make a sustainable supply. Herein, an integrated strategy was designed with P450 source screening, nicotinamide adenine dinucleotide phosphate (NADPH) supply, and endoplasmic reticulum (ER) size rewiring to manipulate three P450s regarded as the bottleneck for parthenolide production. Germacrene A oxidase from Cichorium intybus, costunolide synthase from Lactuca sativa, and parthenolide synthase from Tanacetum parthenium have the best efficiency, resulting in a parthenolide titer of 2.19 mg/L, which was first achieved in yeast. The parthenolide titer was further increased by 300% with NADPH supplementation and ER expanding stepwise. Finally, the highest titers of 31.0 mg/L parthenolide and 648.5 mg/L costunolide in microbes were achieved in 2.0 L fed-batch fermentation. This study not only provides an alternative microbial platform for producing sesquiterpene lactones in a sustainable way but also highlights a general strategy for manipulating multiple plant-derived P450s in microbes.

CsCCD2 Access Tunnel Design for a Broader Substrate Profile in Crocetin Production.

Crocetin, a high-value apocarotenoid in saffron, is widely applied to the fields of food and medicine. However, the existing method of obtaining crocetin through large-scale cultivation is far from meeting the market demand. Microbial synthesis of crocetin is a potential alternative to traditional resources, and it is found that carotenoid cleavage dioxygenase (CCD) is the critical enzyme to synthesize crocetin. So, in this study, we used "hybrid-tunnel" engineering to obtain variants of Crocus sativus-derived CsCCD2, essential for zeaxanthin conversion into crocetin, with a broader substrate specificity and higher catalytic efficiency. Variants including S323A, with a lower charge bias and a larger tunnel size than the wild-type, showed a 5-fold higher crocetin titer in yeast-based fermentations. S323A could also convert the ß-carotene substrate to crocetin dialdehyde and exhibited a 12.83-fold greater catalytic efficiency (kcat/Km) toward zeaxanthin than the wild-type in vitro. This strategy enabled the production of 107 mg/L crocetin in 5 L fed-batch fermentation, higher than that previously reported. Our findings demonstrate that engineering access tunnels to expand the substrate profile by in silico protein design represents a viable strategy to refine the catalytic properties of enzymes across a range of applications.

Compartmentalized Reconstitution of Post-squalene Pathway for 7-Dehydrocholesterol Overproduction in Saccharomyces cerevisiae.

7-Dehydrocholesterol (7-DHC) is the direct precursor to manufacture vitamin D3. Our previous study has achieved 7-DHC synthesis in Saccharomyces cerevisiae based on the endogenous post-squalene pathway. However, the distribution of post-squalene enzymes between the endoplasmic reticulum (ER) and lipid bodies (LD) might raise difficulties for ERG proteins to catalyze and deliver sterol intermediates, resulting in unbalanced metabolic flow and low product yield. Herein, we intended to rearrange the subcellular location of post-squalene enzymes to alleviate metabolic bottleneck and boost 7-DHC production. After identifying the location of DHCR24 (C-24 reductase, the only heterologous protein for 7-DHC biosynthesis) on ER, all the ER-located enzymes were grouped into four modules: ERG1/11/24, ERG25/26/27, ERG2/3, and DHCR24. These modules attempted to be overexpressed either on ER or on LDs. As a result, expression of LD-targeted DHCR24 and ER-located ERG1/11/24 could promote the conversion efficiency among the sterol intermediates to 7-DHC, while locating module ERG2/3 into LDs improved the whole metabolic flux of the post-squalene pathway. Coexpressing LD-targeted ERG2/3 and DHCR24 (generating strain SyBE_Sc01250035) improved 7-DHC production from 187.7 to 308.2 mg/L at shake-flask level. Further expressing ER-targeted module ERG1/11/24 in strain SyBE_Sc01250035 dramatically reduced squalene accumulation from 620.2 mg/L to the lowest level (by 93.8%) as well as improved 7-DHC production to the highest level (to 342.2 mg/L). Then targeting module ERG25/26/27 to LDs further increased 7-DHC titer to 360.6 mg/L, which is the highest shake-flask level production for 7-DHC ever reported. Our study not only proposes and further proves the concept of pathway compartmentalized reconstitution to regulate metabolic flux but also provides a promising chassis to produce other steroidal compounds through the post-squalene pathway.

A "push-pull-restrain" strategy to improve citronellol production in Saccharomyces cerevisiae.

Microbial production of monoterpenes has attracted increasing attention in recent years. Up to date, there are only few reports on the biosynthesis of the monoterpene alcohol citronellol that is widely used as fragrant and pharmaceutical intermediates. Here, we engineered Saccharomyces cerevisiae by employing a "push-pull-restrain" strategy to improve citronellol production based on the reduction of geraniol. Starting from a engineered geraniol-producing strain, different reductases were investigated and the best performing iridoid synthase from Catharanthus roseus (CrIS) resulted in 285.89 mg/L enantiomerically pure S-citronellol in shake flasks. Geranyl diphosphate (GPP), the most important precursor for monoterpenes, was enhanced by replacing the wild farnesyl diphosphate synthase (Erg20) with the mutant Erg20F96W, increasing the citronellol titer to 406.01 mg/L without negative influence on cell growth. Moreover, we employed synthetic protein scaffolds and protein fusion to colocalize four sequential enzymes to achieve better substrate channeling along with the deletion of an intermediate degradation pathway gene ATF1, which elevated the citronellol titer to 972.02 mg/L with the proportion of 97.8% of total monoterpenes in YPD medium. Finally, the engineered strain with complemented auxotrophic markers produced 8.30 g/L of citronellol by fed-batch fermentation, which was the highest citronellol titer reported to date. The multi-level engineering strategies developed here demonstrate the potential of monoterpenes overproduction in yeast, which can serve as a generally applicable platform for overproduction of other monoterpenes.

Endogenous 2µ Plasmid Editing for Pathway Engineering in Saccharomyces cerevisiae.

In Saccharomyces cerevisiae, conventional 2µ-plasmid based plasmid (pC2µ, such as pRS425) have been widely adopted in pathway engineering for multi-copy overexpression of key genes. However, the loss of partition and copy number control elements of yeast endogenous 2µ plasmid (pE2µ) brings the issues concerning plasmid stability and copy number of pC2µ, especially in long-term fermentation. In this study, we developed a method based on CRISPR/Cas9 to edit pE2µ and built the pE2µ multi-copy system by insertion of the target DNA element and elimination of the original pE2µ plasmid. The resulting plasmid pE2µRAF1 and pE2µREP2 demonstrated higher copy number and slower loss rate than a pC2µ control plasmid pRS425RK, when carrying the same target gene. Then, moving the essential gene TPI1 (encoding triose phosphate isomerase) from chromosome to pE2µRAF1 could increase the plasmid viability to nearly 100% and further increase the plasmid copy number by 73.95%. The expression using pE2µ multi-copy system demonstrated much smaller cell-to-cell variation comparing with pC2µ multi-copy system. With auxotrophic complementation of TPI1, the resulting plasmid pE2µRT could undergo cultivation of 90 generations under non-selective conditions without loss. Applying pE2µ multi-copy system for dihydroartemisinic acid (DHAA) biosynthesis, the production of DHAA was increased to 620.9 mg/L at shake-flask level in non-selective rich medium. This titer was 4.73-fold of the strain constructed based on pC2µ due to the more stable pE2µ plasmid system and with higher plasmid copy number. This study provides an improved expression system in yeast, and set a promising platform to construct biosynthesis pathway for valuable products.

Pathway engineering in yeast for synthesizing the complex polyketide bikaverin.

Fungal polyketides display remarkable structural diversity and bioactivity, and therefore the biosynthesis and engineering of this large class of molecules is therapeutically significant. Here, we successfully recode, construct and characterize the biosynthetic pathway of bikaverin, a tetracyclic polyketide with antibiotic, antifungal and anticancer properties, in S. cerevisiae. We use a green fluorescent protein (GFP) mapping strategy to identify the low expression of Bik1 (polyketide synthase) as a major bottleneck step in the pathway, and a promoter exchange strategy is used to increase expression of Bik1 and bikaverin titer. Then, we use an enzyme-fusion strategy to directly couple the monooxygenase (Bik2) and methyltransferase (Bik3) to efficiently channel intermediates between modifying enzymes, leading to an improved titer of bikaverin at 202.75 mg/L with flask fermentation (273-fold higher than the initial titer). This study demonstrates that the biosynthesis of complex fungal polyketides can be established and efficiently engineered in S. cerevisiae, highlighting the potential for natural product synthesis and large-scale fermentation in yeast.